Skip to content

Saved By Zero?

2011 November 12
by dan bertolet

< zHome zero-net energy project in Issaquah, WA >

Over the past few decades designers and policymakers have been working to increase the energy efficiency of buildings, and solid progress has been made. Still, today in the United States buildings account for 49 percent of energy use and 46 percent of greenhouse gas emissions. Successfully tackling the dual challenges of rising energy costs and climate change is going to take massive reductions of building energy use.

A conceptual holy grail for energy-efficient building design is a building that generates as much energy as it consumes, a.k.a. a zero net energy building. And that’s the goal of a recently completed 10-unit townhome development in Issaquah, WA, known as zHome, touted as the “first multifamily, production, zero-energy, carbon-neutral community in the United States.”

Spearheaded by the City of Issaquah, the zHome project was awarded to David Vandervort Architects in Fall 2007, but subsequently the real estate bust forced the original builder to back out. Howland Homes took over in Summer 2008, and the project broke ground that September. Faced with financing challenges and delays, Howland then partnered with Ichijo, a large Japanese builder known for energy-efficient production homes, and the project finished in September 2011.

< zHome zero-net energy project in Issaquah, WA >

zHome was designed to achieve zero net energy use through efficiency measures that reduce consumption by about two-thirds, and photovoltaics (PV) that generate enough electricity to cover the remaining third—approximately 5,000 kWh per year. That requires a hefty amount of PV, and indeed, the south-facing panels that cover the roofs are a prominent feature. During the sunny summer months the PV produce more energy than the buildings need, and the excess is fed back to the grid. If the building operates as expected, that “banked” energy will offset the energy consumed during the dark winter months when PV output is low, the result being zero net energy use on an annual basis.

Energy-efficiency measures incorporated in zHome include ground source heat pumps that provide space heating and domestic hot water, heat recovery ventilation, a tightly sealed and highly insulated envelope (R38 wall, R63 roof, U-0.33 double pane windows), efficient appliances, LED lighting, switched outlets to reduce phantom loads, and a real-time energy monitoring system. (The project is also designed to reduce water consumption by 70 percent.)

So how much did all that extra stuff increase the cost? Asking prices for the units are relatively high for Issaquah: $385k for 799 s.f. 1-bedroom; $530k for 1350 s.f. 2 bedroom; and $625k for 1694 s.f. 3-bedroom. Apparently the free land and significant logistical support provided by the City weren’t enough to negate the cost premium. Eventually the upfront investment in efficiency would be offset by savings in the energy (and water) bills, but given current energy prices payback periods are relatively long. Of course, if all the externalized costs of our energy were included it would be a different story, but unfortunately a carbon tax is not happening any time soon.

< zHome zero-net energy project in Issaquah, WA >

It remains to be seen if zHome will achieve zero net energy performance in the real world, and success will likely depend to some extent on the energy use habits of the occupants—one thing designers don’t have much control over. In any case, whether or not a building can produce enough energy on site to hit net-zero isn’t necessarily the be all and end all for sustainable design. Arguably, what’s more important is the practice of “efficiency first”—that is, first figure out how to fully minimize the building’s energy use, and then worry about how to supply the remaining energy demand.

For example, the Bullitt Foundation’s Living Building is targeting zero net energy and incorporates cutting-edge energy-efficient design. But analysis suggests that it could have been even more efficient if it had been built to the European Passive House standard, in which case it would have required less PV, potentially reducing both cost and physical design constraints.

Furthermore, when you look beyond the single building and consider larger systems of buildings and energy production, in some cases powering a building from an offsite energy source may make more sense than struggling to max out on-site generation. And for buildings taller than about six or seven stories, there simply won’t be enough solar energy impinging on the site to meet demand, even for a hyper-efficient building.

In conclusion, while the concept of zero net energy buildings may have its limitations, projects like zHome and the Bullitt Foundation building remain hugely important for making progress on energy-efficient design. That’s because they challenge designers to (1) work within a highly constrained energy budget, and (2) explore the limits of on-site energy production. And then there’s also the potential for the big win as the designs move into the mainstream. Indeed, Ichijo has ambitions to ramp up the zHome concept to high-volume production. It won’t be a moment too soon.

>>>

Dan Bertolet is an urban planner with VIA Architecture and the founder of Citytank. All photos by the author. All apologies for the the title reference.